Pool robots are an essential tool for pool maintenance. They help clean the pool and reduce the time and effort required for manual cleaning. However, many pool owners are unsure whether it is safe to run their pool robot while shocking the pool.
The answer is not straightforward, as it depends on the type of pool robot and the shock treatment being used.
Some pool robots will be okay to be used during shock treatments, while others may not. Additionally, the type of shock treatment used can also impact whether or not it is safe to run the pool robot.
The quick and easy answer to can you run pool robot while shocking pool – if in doubt, don’t!
Can You Shock Your Pool While Your Robotic Pool Cleaner is Running?
Potential Risks of Running a Pool Robot While Shocking
When shocking your pool, you add chemicals to the water to eliminate bacteria and other contaminants. These chemicals could be harmful to your pool robot and may cause damage to the unit. And that could be an expensive mistake.
Additionally, the shock treatment can cause the water to become cloudy, which can make it difficult for the robot to navigate and clean the pool effectively.
Factors to Consider Before Running a Pool Robot While Shocking
Before running your pool robot while shocking your pool, there are a few factors to consider.
- First, check the manufacturer’s instructions to see if the robotic pool cleaner is designed to withstand the chemicals in your shock treatment.
- Second, consider the condition of your pool robot. If it is already damaged or worn, it may not handle the added stress of the shock treatment.
- Finally, consider the type of shock treatment you are using. Some shock treatments require you to wait a certain amount of time before swimming, so you should also wait before running your pool robot.
How to Run a Pool Robot While Shocking Your Pool Safely
If you have determined that it is safe to run your pool robot while shocking your pool, you can take a few steps to minimize the risk of damage to your robot.
- First, ensure the robot is clean and debris-free before running it.
- Second, monitor the robot while running to ensure it works correctly and does not get stuck on any obstacles.
- Finally, after the shock treatment, rinse your pool robot thoroughly with clean water to remove any residual chemicals that may have accumulated on the unit.
Can I Use Robot Vacuum After Shocking Pool?
In general, using a robot vacuum immediately after shocking the pool is not recommended, as the chemicals used in the shocking process may harm the vacuum’s components or interfere with its functionality.
It is advisable to allow sufficient time for the shock treatment to dissipate and for the pool water to return to a safe and balanced state before resuming a robot vacuum.
However, it is crucial to consult the instruction manual or contact the manufacturer directly to determine the specific recommendations for using a robot vacuum in relation to pool maintenance, especially after a shock treatment.
Following the manufacturer’s guidance will help ensure the longevity and proper functioning of the robot vacuum while maintaining a clean and healthy pool environment.
Should I Vacuum My Pool Before I Shock It
A common question is, “Should I vacuum pool before shocking?”
Most pool professionals generally recommend vacuuming the pool before shocking it. Vacuuming helps eliminate debris, leaves, dirt, and other unwanted particles that might have accumulated on the pool’s surface and bottom. This also applies to using a robot pool cleaner.
Removing this debris ensures the pool shock treatment can effectively reach and sanitize the water.
Moreover, vacuuming assists in maintaining water clarity and balanced chemical levels, ultimately enhancing the overall cleanliness and hygiene of the pool. Therefore, vacuuming before administering a shock treatment is highly advised for optimal pool upkeep.
Pool Care Handbook and Video Course
When I bought my house with a swimming pool, I knew absolutely nothing about pool care. I just winged it for a while, making many mistakes along the way.
Fortunately, I was recommended Swim University’s Pool Care Handbook and Video Course. I bought it and it was an absolute game-changer.
It was the best money I spent that year. I learned everything from basic cleaning to advanced troubleshooting. Swim University offers a no-quibble refund policy too so what do you have to lose?
Conclusion
In conclusion, running a pool robot while shocking the pool can be done safely and effectively if proper precautions are taken. While it is important to follow the manufacturer’s instructions for both the pool robot and the shock treatment, a few additional steps can be taken to ensure the safety of both the pool and the robot.
After adding shock treatment, testing the chlorine level before running the pool robot is recommended. This will allow the shock to fully circulate through the pool and dissipate before the robot is put back into operation.
Finally, it is important to regularly clean and maintain the pool robot to ensure it is functioning properly. This includes regularly emptying the filter canister, checking the brushes and wheels for damage, and ensuring all connections and hoses are secure.
By following these simple steps, pool owners can safely and effectively run their pool robot while shocking their pool, ensuring a clean and healthy swimming environment.
You may also find the article Can you leave a robotic pool cleaner in the pool useful.
I have had hot tubs for over 20 years and a pool for the last 10 years. I had to learn how to clean, maintain and fix them the hard way. Since then I have helped many friends and neighbors with their pools and now I want to share everything I have learned with you. About Me
